15% every product we have a great offer for you



No products in the cart.

Click here to add content.

Braille and Tactile Signages – Requirements and Tips You Need to Know

Braille and Tactile Signages - Requirements and Tips You Need to Know

Braille and Tactile Signages - Requirements and Tips You Need to Know


In Australia, the law requires buildings and establishments to have compliant statutory signs. Establishments must have braille and tactile signs in their premises for people with disabilities, following the Disability Access to Premises Standard and Australian Standard AS1428.1.

The law mandates that establishments must accommodate people with disabilities by creating signage that follow all requirements of the national buildings regulations. If you’re managing a building, here are some tips on how to create custom banners and signage properly.


What are the requirements for braille and tactile signage?

According to the Building Code of Australia, there are a few requirements in creating braille and tactile signages that establishments should follow. The symbols used to label unisex accessible sanitary facilities should use an international symbol for male and female. This signage must also have the letters LH or RH to inform the public if they are left-hand or right-hand transfers, with a minimum of 20mm Sans Serif font.


Where should you put the signage?

A person with disability must be able to reach out for the sign to read it. Ideally, you must place the signage not less than 1,200mm from the ground and not over 1,600mm. If your signage has a single line of characters, it must be placed a bit higher at 1,250mm and not over 1,350mm.

If you need to place a sign to indicate individual rooms, it is required that you place it on the wall at around 50mm to 300mm from the door’s architrave. This way, the person can locate the signage right away and the corresponding door leading to the room. If space is a problem, you can place the signage on the door itself or the non-latch side of the door.

If you need to place a sign for travel and direction, it is required to put it in the direction of the traveler. Ideally, the traveler will be walking by the side of the wall. Place your signage on this side of the wall. If there is a wall disruption, place the signage on the connecting wall after the gap.

These requirements are vital to follow because this information is standard and is passed on to those with disabilities. Non-compliance of these requirements may confuse people and disregard the law, which can cause further issues.


Where can I get this signage?

Numerous companies specialise in making signage for establishments that follow the required specifications. Most of these signs use PVC as their base material because of its thickness and durability.

When creating custom banners and signage for your establishment, it is best to work with a reputable company that produces these signs or buy from an established online company. Most online sign companies have PVC signs that follow legal requirements.

You’ll need to ensure that the signage company is complying to the terms of The Building Code of Australia (Section D3.6), Design for Access and Mobility (AS1428.1-2011) and Public Information Symbol Signs (AS2899.1-1986).



You’ll notice that every building that you visit will have PVC signs with braille and tactile that will help people with disabilities. By following these laws and requirements, you will help people navigate around your premises smoothly and without any problem.

All Signs Online is an online company that provides a wide range of popular signage in Australia. We offer high-quality retail signs, vehicle signs, corflute signs, PVC signs, and more. Check out our products today and see what fits your establishment.

Leave a Reply

Recent Posts